Using Anynet+ (Hdmi-Cec); Connecting An External Device Through Anynet+ And Using Their Menus - Samsung Q900R Series E-Manual

Using Anynet+ (HDMI-CEC)

Control an external device connected via Anynet+ (HDMI-CEC) with the remote control.
You can use the TV's remote control to control external devices that are connected to the TV by an HDMI cable and
that support Anynet+ (HDMI-CEC). Note that you can only set up and operate Anynet+ (HDMI-CEC) with the remote
control.

Connecting an external device through Anynet+ and using their menus

Settings
1.
Set Anynet+ (HDMI-CEC)
2.
Connect an HDMI-CEC-compliant device to the TV.
3.
Turn on the connected external device. The device is automatically connected to the TV. After connection is
finished, you can access the menu of the connected device using your TV remote and control the device.
" The connecting process can take up to 2 minutes to complete.
Read before connecting an Anynet+ (HDMI-CEC) device
" Anynet+ (HDMI-CEC)-enabled devices must be connected to the TV with an HDMI cable. Note that some HDMI cables may
not support Anynet+ (HDMI-CEC).
" You can configure the TV's Universal Remote to control third-party cable boxes, Blu-ray players, and home theatres that
do not support HDMI-CEC. For more information, refer to "Controlling External Devices with the Samsung Smart Remote -
Using the Universal Remote".
"
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
" The TV remote control may not work under certain circumstances. If this occurs, set up the device as an Anynet+ (HDMI-
CEC)-enabled device again.
General External Device Manager
to On.
Anynet+ (HDMI-CEC)
- 52 -
Try Now