I Have Trouble Launching/Using Apps - Samsung Q900R Series E-Manual

The problem
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
The Anynet+ device won't
play.
The connected device is
not displayed.
The TV audio is not being
played through the AV
receiver.

I Have Trouble Launching/Using Apps

When apps aren't working, these steps may help resolve the problem.
The problem
I launched an app, but
it's in English. How can I
change the language?
My application is not
working.
You cannot use the remote control when the TV is configuring Anynet+ or switching to a
viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or
has switched to a viewing mode.
You cannot use the play function when
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC)
● Settings
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
Connect an optical cable to the TV and the AV receiver.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an AV receiver that supports ARC.
Languages supported by the app may be different from the user interface language. The ability
to change the language depends on the service provider.
Check with the service provider.
Refer to the Help section on the application service provider's website.
Try this!
Start Setup is in progress.
and see if Anynet+ (HDMI-CEC)
General External Device Manager
Try this!
- 136 -
has been set to On.
Anynet+ (HDMI-CEC)