GoMax Electronics SP-0002 User Manual

1x2 component/composite distribution amplifier

SP-0002

1x2 Component/Composite Distribution

Amplifier

User Manual

The SP-0002 1x2 YPbPr/Composite Distribution Amplifier has been tested for conformance to safety

regulations and requirements, and has been certified for international use. However, like all electronic

equipments, the SP-0002 should be used with care. Please read and follow the safety instructions to protect

yourself from possible injury and to minimize the risk of damage to the unit.

Follow all instructions and warnings marked on this unit.

Do not attempt to service this unit yourself, except where explained in this manual.

Provide proper ventilation and air circulation and do not use near water.

Keep away the objects that might damage the device and assure that the placement of this unit is on a

stable surface.

Use only the power adaptor, power cords and connection cables designed for this unit.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

Made in Taiwan

Safety and Notice

Table of Contents

Do you have a question about the SP-0002 and is the answer not in the manual?

Page 1 However, like all electronic equipments, the SP-0002 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Page 2 Model Name SP-9002 SP-0002 The SP-0002 is designed to work as a duplicator and an amplifier at the same time for component or Technical composite video applications. The SP-0002 not only takes one video input from a typical component source...
Page 3 Panel Descriptions Limited Warranty The SELLER warrants the SP-0002 1x2 YPbPr/Composite Distribution Amplifier to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surges.

Sp-9002