Installing the memory module
1. Insert the memory module into its connector at a 30 degree angle until the contacts are fully seated into the slot. Then,
press the module until the clips secure the memory module.
2. Install the:
a.
battery
b.
base cover
3. Follow the procedure in
Power button board
Removing power button board
1. Follow the procedure in
2. Remove the:
a.
Removing the SIM tray – WWAN models
b.
base cover
c.
battery
d.
Hard disk
e.
System fan
f.
VGA board
3. To remove the power button board:
22
Disassembly and reassembly
After working inside your
computer.
Before working inside your
on page 12
computer.