Troubleshooting - Focus TView Micro XGA User Manual

Chapter 6

Troubleshooting

This chapter describes possible problems that you might encounter
and ways to solve them.
Problem
No video from
Check the connection from the computer's
the TView video output port to the monitor in port at
Micro XGA the rear of the TView unit.
Check the connection from the comp video
out port or S-Video out port to the input on
your monitor or VCR.
Ensure that the TV or VCR is ON.
Check the connection from the power
supply. Is the TView unit plugged in? Is the
LED ON and green?
Ensure that your television or VCR has
been configured to accept auxiliary video
input.
Ensure that the TView Micro XGA is con-
nected to the appropriate video connector
on your TV or VCR. At the TV or VCR end,
the cable should be connected to the
VIDEO, VIDEO IN, or AUX port.
If no VGA Video from computer, LED should
be red, and the Micro XGA will display the
TView Micro XGA User's Guide
Possible Causes/Solutions
Chapter 6 35