Special Characters; Accented Characters - Videonics TM-2000 Instruction Manual

VIDEONICS TITLEMAKER 2000

SPECIAL CHARACTERS

Refer to Chapter 6 for a complete listing, with
explanations.
The following special characters are entered by
pressing ACCENT and the indicated character at
the same time. For instance, ACCENT + C indi-
cates you press C and ACCENT together. +
indicates that two keys are pressed together; you
don t push the + key. Capital letters are used for
clarity; you don t press SHIFT unless it is indi-
cated.
* Note: TitleMaker 2000 offers curly quotes in
addition to straight quotes. Curly quotes look
like this: , as opposed to straight quotes
which look like this: " ' . It also has the em-dash
( ), a dash that is longer than a hyphen (-). Note
that the straight quotes in some fonts are actually
slightly curled due to the style used by that font s
designers.
** For the degree symbol, type ACCENT + 7
followed by SPACE.
ACCENT + C
ACCENT + SHIFT + C
ACCENT + A
ACCENT + SHIFT + A
ACCENT + O
ACCENT + SHIFT + O
ACCENT + 0
ACCENT + SHIFT + 0
ACCENT + S
ACCENT + D
ACCENT + [
ACCENT + ]
ACCENT + 1
ACCENT + /
¢ ACCENT + Q
£ ACCENT + W
ACCENT + E
ACCENT + R
ACCENT + T
© ACCENT + Y
ACCENT + 7; SPACE **
ACCENT + U
ACCENT + *
ACCENT + ; *
ACCENT + ' *
ACCENT + , *
ACCENT + . *
The following characters are not printed on
the keypad.
ACCENT + arrow keys
ACCENT + F
ACCENT + G
ACCENT + H
ACCENT + J
ACCENT + K
ACCENT + L

ACCENTED CHARACTERS

The accents above the 2, 3, 4, 5, 6, and 7 keys are
used with other letters to make accented letters.
For instance, to type , you would use ACCENT +
4, followed by the letter U. The capitalized version
( ) would be displayed using ACCENT + 4, fol-
lowed by SHIFT + U.
In this list, letter means the letter you want
accented.
PAGE 85