VIDEONICS TITLEMAKER 2000
output. In other words: Use S-video (Y/C) jacks if your source and re-
corder are both equipped with them; use only the composite (RCA-style)
jacks if either lacks S-video jacks.
If you are using the S-video output jacks, you
must use S-video for the input. If you try to
use the S-video output and the composite
(RCA) input, an on-screen warning appears
to remind you to use S-video in.
• Record VCR to OUTPUT monitor. If you are using a Record VCR, the
OUTPUT monitor can be connected to the VCR using an RF (antenna/
cable type) cable, composite (RCA-style) cable, or S-video (Y/C) cable,
depending on what types of jacks are available on the VCR and monitor. If
you have a choice, S-video is generally better than composite and compos-
ite is better than RF.
• PREVIEW. If you are using a PREVIEW monitor, it must be connected via
a composite (RCA-style) cable.
• BNC. If you plan to use equipment with BNC jacks, you will also need
RCA-BNC adapters.
• Audio. The audio jacks on the TitleMaker 2000 are simple pass-through
connectors, provided to make connections between two video devices
convenient. AUDIO IN is routed di-
rectly to AUDIO OUT, unmodified by
the unit.
IN and OUT Markings
Hint: Always connect the OUT jack of one device to the IN jack of the next.
Never connect two OUTs together.
IN
OUT
PAGE 13
OUT
IN