Table of Contents
Advertisement
Quick Links
Installation & Configuration Guide
XX239-03-00
ViconNet Nucleus
Vicon Industries Inc.
Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the
operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed
to be used in life-critical situations and must not be used for this purpose.
www.vicon-security.com
Document Number: 8009-8239-03-00
Issued: 715
Product specifications subject to change without notice.
Copyright © 2015 Vicon Industries Inc. All rights reserved.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon 239-03-00 Series
Summary of Contents for Vicon 239-03-00 Series
- Page 1 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed to be used in life-critical situations and must not be used for this purpose.
-
Page 3: Table Of Contents
Shipping Instructions Technical Information Vicon, ViconNet, and their logos are registered trademarks of Vicon Industries Inc. Windows is a registered trademark of Microsoft Corporation. Other company and brand products and service names are trademarks or registered trademarks of their respective holders... -
Page 4: General
ViconNet software manual for details on setting up ViconNet. The Nucleus software, VNUC-SWV8, is available and can be installed on a PC that meets the minimum requirements. Refer to current datasheet. Refer to our website, www.vicon-security.com, for the latest version of this manual. -
Page 5: Hardware Installation
The rack-mount model, VNUC-PCV8-RK is a 1 RU unit; the VNUC-PCV8 is a ITX mini chassis (desk-top unit). These units meet requirements for an FCC Class A computing device and CE Vicon requires the use of line conditioners, voltage regulators and uninterruptible power supply (UPS) systems in the electrical power service. Note Read all instructions before beginning the installation. -
Page 6: Unpacking And Inspection
ViconNet Nucleus Installation and Configuration Guide Unpacking and Inspection All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to provide suitable delivery. Inspect the cartons upon delivery and, if damage is present, make detailed notes on the carrier’s bill. -
Page 7: Unit Components
ViconNet Nucleus Installation and Configuration Guide Unit Components This section describes the VNUC-PCV8-RK front and rear panels. Note Ports may vary subject to variations in hardware, but will be similar in function. Front Panel Controls and Connections • Power Switch: Used to power on the unit. •... - Page 8 ViconNet Nucleus Installation and Configuration Guide Rear Panel Controls and Connections • Audio – Mic In/Speaker Output: Jacks used for audio input and output. • Power Receptacle: Used to connect the provided power cable. • Keyboard Port: USB connector used to connect a standard PC keyboard. •...
-
Page 9: Mounting
ViconNet Nucleus Installation and Configuration Guide Mounting There are two types of mounting, depending on the model, either ITX mini chassis desktop or in a rack. Desktop The desk or table must provide a surface of suitable strength for the unit’s weight. -
Page 10: Installing The Vnuc-Pcv8
ViconNet Nucleus Installation and Configuration Guide Installing the VNUC-PCV8 After the unit is mounted permanently, follow the steps in this section to install the hardware. • Step 1: Connecting the Hardware, below • Step 2: Connecting the Power Supply Important Notes The connection of external hardware may require simple hand tools. - Page 11 ViconNet Nucleus Installation and Configuration Guide Step 2: Connecting the Power Supply To ensure that the unit is protected during a power failure and that no important data is lost, it must be connected to an uninterruptible power source (UPS) before use. To connect the UPS: 1.
-
Page 12: Operation
ViconNet Nucleus Installation and Configuration Guide Operation Powering On the Unit To power on the system: With the unit set up as shown in Installation, open the front panel cabinet and press the front panel pushbutton Power Switch. The button does not lock into position;... -
Page 13: Using The Viconnet Application
ViconNet Nucleus Installation and Configuration Guide Using ViconNet Accessing the Configuration Functions The configuration functions are performed via the System Settings window applicable to a selected site. This unit will be configured to be the Nucleus of the system. To access the System Settings window: 1. - Page 14 ViconNet Nucleus Installation and Configuration Guide 2. Select the site for which you want to configure the network setup and click . The System Settings window is displayed. Note The VNUC-PCV8 can configure all sites in the network. The System Settings window has the following options: When the function is not supported, the associated button is disabled (grayed out).
-
Page 15: Registering Your System
ViconNet Nucleus Installation and Configuration Guide Note The Site Name and Site IP information are displayed automatically on this and subsequent windows. Registration The VNUC-PCV7 is delivered fully registered. Note If your system includes third party camera(s), they need a license (VN-CAM- LIC) and to be registered. - Page 16 ViconNet Nucleus Installation and Configuration Guide Configuring the Nucleus The Nucleus takes an active role in the ViconNet system, acting as a central station that connects all devices running the ViconNet application. This is why the ViconNet system is designed in a way that will allow it full operation even if the Nucleus is down.
- Page 17 ViconNet Nucleus Installation and Configuration Guide Step 1: Setting the Site’s IP Address In this step, you will configure the IP address of this site in the network. 1. Go to the site whose IP address you want to set. Then, from the ViconNet Main window, click .
- Page 18 ViconNet Nucleus Installation and Configuration Guide (Optional) To synchronize the time with your local time settings, click and update the time in the displayed Date/Time Properties window. This is useful if you move from one time zone to another. 7. In the IP Address Settings area, select the Specify an IP address radio button and set the Local IP address and the Subnet Mask.
- Page 19 ViconNet Nucleus Installation and Configuration Guide Step 3: Configuring a Site to Connect to Nucleus Follow the procedure below to connect a site to the Nucleus. 1. Go to the site you want to setup and follow steps 1 through 3 in Step 1: Setting the Site’s IP Address.
- Page 20 ViconNet Nucleus Installation and Configuration Guide Step 5: Testing the Network In this final step, you will carry out a number of operational tests to ensure that the network has been setup properly. 1. In the Main window, ensure that all sites appear in the Site List when they come online and that you can select a camera from each site by clicking on 2.
- Page 21 ViconNet Nucleus Installation and Configuration Guide 4. Go to the site handling the master Nucleus and drag a camera from the Site List to check if video can be seen from a site on the Nucleus. 5. Go to the site and playback a camera. The site should appear in the Site List.
-
Page 22: Shipping Instructions
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A. -
Page 23: Technical Information
Power: 1 standard 3-conductor female socket Types & Video Output: VGA mini D-sub or HDMI connector Quantities Network Port: Ethernet 100Base-T RJ-45 jack Keyboard Port: USB Mouse Port: USB Peripheral Ports: USBs If full Windows OS is required, contact your Vicon Representative. - Page 24 ViconNet Nucleus Installation and Configuration Guide Mechanical Characteristics Application Indoor Mounting ITX mini chassis desktop or standard 19 in. (483 mm) rack mount and stackable, 1 RU height Dimensions VNUC-PCV8-RK Rack-Mount Unit: Height (H): 1.75 in. (44.45 mm) Width (W): 19.0 in. (483 mm) with racking ears; 17.6 in.
- Page 25 “autopan” or “tour” modes of operation. Such continuous operation is outside the scope of this warranty. 10. Any product sold as “special” or not listed in Vicon’s commercial price list: One year from date of original retail purchase.
- Page 26 Except as provided in this written warranty and to the extent permitted by law, neither Vicon nor any affiliated shall be liable for any loss, (including loss of data and information), inconvenience, or damage, including, but not limited to, direct, special, incidental or consequential damages, resulting from the use or inability to use the Vicon product, whether resulting from breach of warranty or any other legal theory.
- Page 27 Vicon Industries Inc. For office locations, visit the website: www.vicon-security.com...
Need help?
Do you have a question about the 239-03-00 Series and is the answer not in the manual?
Questions and answers