Exiting The Schedule Editor - Visual Circuits MC User Manual

Load Local
The l button provides the capability to load a schedule
Load Loca
file from the local computer or network to the Mantis, rather than
one already stored on board. This is useful when a schedule is
stored on another computer or on removable media.
To perform a local load:
1. Click on the
Editor screen. The following dialog box will appears:
Figure 19. WebView Load Local Browse Dialog Box
2. Click the
Browse
loaded.
3. Select the file and click
4. The schedule loads to the Mantis and its filename appears in
the Event field.
5. Click the
OK
The Schedule Editor main screen reappears with the schedule just
loaded open and ready for editing.

Exiting the Schedule Editor

At any point while working in the Schedule Editor you may exit by
clicking on any of the menu navigation buttons on the left side of
the screen. However, any unsaved changes made will be lost.
60
button at the bottom of the Schedule
Load Local
button and locate the schedule file (.fsc) to be
Open
.
.
W V
EB IEW