Configuring For A Network; Attaching A Laptop Or Pc - Visual Circuits MC User Manual

Configuring for a Network

Mantis MC default network settings are:
IP Address: 10.0.0.1
Network Mode: Static
To initially change the Mantis network settings, it is necessary to
attach a computer directly to the Mantis.
Before beginning, verify that the computer and Mantis are
powered off. When connections are completed, power on the
devices.

Attaching a Laptop or PC

Ethernet
Connect the computer directly to the Mantis using an
Ethernet crossover cable.
or
Connect using standard Ethernet cables and a hub or switch.
Serial
Use a null modem cable (RS232, female DB-9 to female DB-9)
when connecting to the Mantis via the serial port.
Ethernet via Hub or Switch.
Ethernet via Cross-over Cable.
Mantis Multi Channel
™
Quick Start
7