Changing Tcp/Ip Settings - Visual Circuits MC User Manual

Mantis Multi Channel

Changing TCP/IP Settings

There are three methods for initially changing the Mantis TCP/IP
settings: Front Panel, WebView, Serial Commands.
Front Panel
The front panel of the Mantis has control buttons and a display,
similar to those of a VCR, that can set most of the Mantis features
and functions.
For information about the control buttons and display, Front
Panel on page 8.
For information about changing TCP/IP settings, see Step 1:
Connect to the Network on page 31.
WebView via Ethernet Port
WebView is a browser-based, administration tool-kit that resides
on the Mantis, see .
1. Set the attached PC's IP address to a number in the same range
as the Mantis, such as 10.0.1.2.
2. Open a browser and enter the default IP address 10.0.1.1 in the
address field.
8
™
Quick Start