Table of Contents
Advertisement
Mantis Multi Channel
Connections Guide
Video Output Configuration
The basic configuration of the Mantis MC provides multiple types
of video output simultaneously, on a channel-by-channel basis. For
example, it is possible to configure the MC so that Channel 1
outputs to a composite monitor, while Channel 2 goes to a
component or RGB monitor. For more information on configuring
video output types see Mantis System Settings, Video menu, which
is accessible from the front panel or WebView, Video Settings on
page 73.
Video and Audio Connections
CVBS Audio Out (Left)
S/PDIF
Channels
1
Analog
Audio
1
Channels
CVBS Audio Out (Right)
Figure 1. Mantis MC Backplane Audio/Video Connections
CVBS Connections
Connect a composite cable to the corresponding Channel 1 or 2
connector. The Mantis MC uses BNC connectors.
4
™
Quick Start
CVBS Output
Reserved for
future use.
Channels
3
4
2
1
2
3
4
Reserved for future use.
CVBS Input
Reserved for
future use.
2
3
4
Channels
Video 1
Component
RGB
S-video
Serial
RS-232
Video 2
Component
RGB
S-video
Network 10/100
Advertisement
Table of Contents
