Advanced Setup - Videonics MX-1 Instruction Manual

PAGE 24
• Use the right and left arrow keys to change the video connection. You can
choose either the S-video (Y/C) jacks or the composite (RCA-style) jacks of
any of the four inputs.
• Use the up and down arrows to change the audio connection. You can use
the stereo audio jacks (both L and R) from IN 1 or IN 2 or IN 3, or you can
choose the L-only jack from IN 3, or the R-only jack from IN 3. If you use L-
only or R-only from IN 3, then whatever appears on that jack will be
routed to both the left and right channels. A mono source can be connected
in this way and its sound will appear on both channels.
You can also choose no audio at all, making that source silent. To do this,
press the up arrow button until none of the audio inputs are highlighted.
• Press OK or SETUP to return to the PREVIEW screen when you're done.
For example, if you wanted source B's video to come from IN 3 and you
wanted B's audio to come from the left jack of IN 3, you would press B to
highlight the B source, then use the up and down arrow keys to make the
screen look like this:
Note that any changes you make to the Setup screen are lost when the unit
is turned off or loses power.

Advanced Setup

Press the SHIFT and SETUP buttons simultaneously to alter the advanced
settings.
Hint: Most users will have no need to alter these settings, with the exception of
headphone volume or the use of filter settings when working with sources of marginal
quality.
• Use the right and left arrow keys to choose the setting you want to change.
VIDEONICS DIGITAL VIDEO MIXER