Specifications; Sd Card Slot; Buttons; Connectors - Axis P1245 User Manual

AXIS P1245 Network Camera

Specifications

Specifications
To find the latest version of the product's datasheet, go to axis.com > [product] > Support & Documentation.
LED indicators
LED Color
Status Green
Amber
Red
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options
> Ports & Devices > LED.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

SD card slot

NOTICE NO NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see axis.com

Buttons

Control button
For location of the control button, see Product overview on page 7 .
The control button is used for:
• Resetting the product to factory default settings. See page 44.
• Connecting to an AXIS Video Hosting System service. See page 36. To connect, press and hold the button for about 3
seconds until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See page 36. To connect, press and hold the button for about 3 seconds.

Connectors

Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
Indication
Steady green for normal operation.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes red for firmware upgrade failure.
49