Toro TimeCutter HD X5450 Operator's Manual page 25

Figure 33
1. Locknuts—front of
discharge plate (install
after baffle is removed)
2. Hex-head bolt—forward
hole in deck (install after
baffle is removed)
3. Locknut—forward hole in
deck (install after baffle is
removed)
4. Carriage bolts—front of
discharge plate (install
after baffle is removed)
9. Locate the baffle guard at the front edge of the side
discharge opening (Figure
10. Remove the fasteners securing the baffle guard and the
right baffle to the mower deck
Note: Remove the baffle guard and retain all fasteners.
11. Remove the 2 locknuts (5/16 inch) securing the welded
posts of the right baffle to the top of the mower deck
at center and right of center positions
5. Baffle guard—54-inch
decks
6. Locknut (5/16 inch)
7. Carriage bolt (5/16 x 3/4
inch)
33).
(Figure 33).
(Figure 34).
2
g190737
1. Locknut (5/16 inch)
2. Right baffle
12. Remove the carriage bolt and locknut securing the right
baffle to the top of the mower deck and remove the
right baffle from the mower deck
13. Install the fasteners removed previously at the front
holes in the discharge plate and forward hole in the
deck (Figure
14. Locate the cutoff baffle in the loose parts bag, remove
the fasteners at the rear holes of the discharge plate,
and install the baffle at the side-discharge opening on
the mower deck
1. Carriage bolts
2. Rear holes in the
discharge plate
25
3
Figure 34
3. Welded posts (right baffle)
(Figure
33).
(Figure 35).
Figure 35
3. Cutoff baffle
4. Locknuts
1
G010704
g010704
34).
g190735