Toro TimeCutter HD X5450 Operator's Manual page 2

Hide thumbs Also See for TimeCutter HD X5450:
Table of Contents

Advertisement

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
This product complies with all relevant European directives;
for details, please see the separate product specific Declaration
of Conformity (DOC) sheet.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on any
forest-covered, brush-covered, or grass-covered land unless
the engine is equipped with a spark arrester, as defined in
Section 4442, maintained in effective working order or the
engine is constructed, equipped, and maintained for the
prevention of fire.
Gross Horsepower
The gross or net horsepower of this engine was laboratory
rated by the engine manufacturer in accordance with the
Society of Automotive Engineers (SAE) J1940. As configured
to meet safety, emission, and operating requirements,
the actual engine torque on this class of mower will be
significantly lower.
Go to www.Toro.com to view specifications on your mower
model.
Introduction
This rotary-blade, riding lawn mower is intended to be used
by residential homeowners or hired operators. It is designed
primarily for cutting grass on well-maintained lawns on
residential or commercial properties. It is not designed for
cutting brush or for agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
your product ready.
Figure 1
model and serial numbers on the product. Write the numbers
in the space provided.
1. Model and serial number plate
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety-alert symbol.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
identifies the location of the
Figure 1
(Figure
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g188704
2),
g000502

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter hd x48507486474865

Table of Contents