Adjusting The Anti-Scalp Rollers - Toro TimeCutter HD X5450 Operator's Manual

4. Push on the deck-lift pedal with your foot and pull
the handle rearward to disengage the transport lock
(Figure 25).
5. Lower the deck slowly until the lever makes contact
with the pin.
Figure 26
1. Deck-lift pedal
2. Handle
3. Pin
4. Height-of-cut positions
Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, it is recommended
to adjust the height of the anti-scalp rollers.
1. Disengage the blade-control switch (PTO), move the
motion-control levers to the N
and engage the parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Adjust the anti-scalp rollers as shown in
g188850
1. Anti-scalp roller
2. Spacer
3. Bushing
22
-
EUTRAL LOCK
Figure
g029955
Figure 27
4. Flange nut
5. Bolt
position,
27.
g029955