Kenmore Elite 795.5182 Use & Care Manual page 16

USING YOUR REFRIGERATOR
Ultra Ice
• When you touch the Ultra Ice button, the Ultra Ice icon
on the display panel will illuminate and will continue
for 24 hours. The function will automatically shut off
after 24 hours.
• You can stop this function manually by touching the
button one more time.
• This function increases both ice making and freezing
capabilities by running the freezer compartment at the
coldest setting for a 24-hour period.
Water Filter Reset
When the water fi lter indicator turns on, you need
to change the water fi lter. After changing the water
fi lter, press and hold the Filter Reset button for three
seconds to turn the indicator light off . You need
to change the water fi lter approximately every six
months.
Door Alarm
• When power is connected to the refrigerator, the door
alarm is initially set to ON. When you press the Door
Alarm button, the display will change to OFF and the
Door Alarm function will deactivate.
• When either the refrigerator or the freezer door is left
open for more than 60 seconds, the alarm tone will
sound to let you know that the door is open.
• When you close the door, the door alarm will stop.
Control Lock
• When power is initially connected to the refrigerator,
the Lock function is off .
• If you want to activate the Lock function to lock other
buttons, press and hold the Door Alarm button for
three seconds or more. The Control Lock indicator will
turn on and the Lock function is now enabled.
• When the Lock function is activated, no other buttons
will work. The dispenser pad is also deactivated.
• To disable the Lock function, press and hold the Door
Alarm button for approximately three seconds.
Ambient Mood Light ⁄ Dispenser Light
A white light illuminates the dispenser area whenever
the dispenser pad is engaged. The dispenser area
can also be illuminated by a mood light, which is
activated by pressing the Light button. When the
Mood Light is activated, the indicator light above the
Light button turns on.
CAUTION
Demo Mode (For Store Use Only)
The Demo Mode disables all cooling in the
refrigerator and freezer sections to conserve energy
while on display in a retail store. When activated,
OFF will display on the control panel.
To deactivate:
With either refrigerator door opened, press and
hold the Refrigerator Temp. and Ultra Ice buttons
at the same time for fi ve seconds. The control panel
will beep and the temperature settings will display
to confi rm that Demo Mode is deactivated. Use the
same procedure to activate the Demo Mode.
Adjusting Control Settings
Give the refrigerator time to cool down completely
before making fi nal adjustments. It is best to wait 24
hours to let the normal settings recommended above
stabilize before making any changes. If you need to
adjust the temperature in the refrigerator or freezer,
start by adjusting the refrigerator temperature and
allow 24 hours for the temperature to stabilize again.
If it is still too warm or too cold, then adjust the
freezer control.
Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.
CONDITION/REASON
REFRIGERATOR section too
warm.
• Door opened often.
• Large amount of food
added.
• Room temperature very warm.
FREEZER section too warm/ice
not made fast enough.
• Door opened often.
• Large amount of food added.
• Very cold (55°F (13°C)) room
temperature. (Compressor
does not cycle often enough.)
• Heavy ice usage.
• Air vents blocked by items.
REFRIGERATOR section too
cold.
• Controls not set correctly for
your conditions.
FREEZER section too cold.
• Controls not set correctly for
your conditions.
16
RECOMMENDED ADJUSTMENT
• Set the REFRIGERATOR
control one degree
colder; wait 24 hours for
the new setting to take
full eff ect before making
another adjustment.
• Set the FREEZER control
one degree colder;
wait 24 hours for the
new setting to take full
eff ect before making
another adjustment.
• Move items out of air
stream.
• Set the REFRIGERATOR
control one degree
warmer; wait 24 hours for
the new setting to take
full eff ect before making
another adjustment.
• Set the FREEZER control
one degree warmer;
wait 24 hours for the
new setting to take full
eff ect before making
another adjustment.