TP-Link Archer C1200 User Manual page 12

Chapter 2
5. Verify that the following LEDs are on and solid before continuing with the configuration.
Note:
If the 2.4G LED and 5G LED
LEDs again a few seconds later.
6. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
• Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
TP-Link_XXXX_5G
Connect automatically
Power
2.4G
On
On
are off, please press the WPS/Wi-Fi On/Off button for 2 seconds and check the
:36:L)L 2Q2
Connect
Internet
5G
On
On
Ethernet cable
Smart Device
< Settings
Wi-Fi
CHOOSE A NETWORK...
or
TP-Link_XXXX
TP-Link_XXXX_5G
Other...
Connect the Hardware
Wi-Fi
7