Table of Contents
Advertisement
Chapter 14
4. Click
Browse
and select the downloaded firmware file.
5. Click
Upgrade
and wait for a few minutes until the router completes the upgrading
and restarts.
14. 4. Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file to your computer for future use and restore the router to
a previous settings from the backup file when needed. Moreover, if necessary you can
erase the current settings and reset the router to the default factory settings.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
¾ To backup configuration settings:
Click
Backup
to save a copy of the current settings to your local computer. A '.bin' file of
the current settings will be stored to your computer.
¾ To restore configuration settings:
1. Click
Browse
to locate the backup configuration file stored on your computer, and
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the router.
¾ To reset the router except your login password and TP-Link ID:
1. Click
Restore
under the
System Tools
>
Backup &
Factory Default Restore
Restore.
session.
Manage the Router
91
Advertisement
Table of Contents
