Table of Contents
Advertisement
Chapter 1
LED Explanation
Name
(Power)
(2.4GHz Wireless)
(5GHz Wireless)
(60GHz
Wireless)
(Ethernet)
(Internet)
(WPS)
(USB)
The following buttons (view from left to right) are also located on the front.
Button Description
Name
(Wi-Fi Button)
(WPS Button)
(LED Button)
Status
On
The system has started up successfully.
The system is starting up or the firmware is being upgraded. Do
Flashing
not disconnect or power off your router.
Off
Power is off.
On
The 2.4GHz wireless band is enabled.
Off
The 2.4GHz wireless band is disabled.
On
The 5GHz wireless band is enabled.
Off
The 5GHz wireless band is disabled.
On
The 60GHz wireless band is enabled.
Off
The 60GHz wireless band is disabled.
At least one powered-on device is connected to the router's LAN
On
port.
Off
No powered-on device is connected to the router's LAN port.
Blue On
Internet service is available.
The router's Internet port is connected, but the internet service
Orange On
is not available.
Off
The router's Internet port is unplugged.
This light remains on for 5 minutes when a WPS connection is
On/Off
established, then turns off.
Flashing
WPS connection is in progress. This may take up to 2 minutes.
On
The inserted USB device is ready to use.
Flashing
A USB device is being identified.
Off
No device is plugged into the USB port.
Press and hold this Wi-Fi button for about 2 seconds to turn on or off the wireless
function of your router.
Press this WPS button, and immediately press the WPS button on your client
device. The WPS LED
indicating successful WPS connection.
Press and hold the LED button for about 1 second to turn on or off the LEDs of
your router.
Get to Know About Your Router
Indication
Description
of the router should change from flashing to solid on,
4
Advertisement
Table of Contents
