Table of Contents
Advertisement
Chapter 14
14. 3. 2. Manual Upgrade
1. Download the latest firmware file for the router from www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to
Advanced
>
4. Focus on the Device Information section. Make sure the downloaded firmware file is
matched with the
5. Focus on the
Manual Upgrade
firmware file, and click Upgrade.
6. Wait a few minutes for the upgrade and reboot to complete.
14. 3. 3. Restore Interrupted Upgrade After Power Failure
If your router cannot start up after an upgrade interruption due to power failure, follow
the steps below to restore the interrupted upgrade. Otherwise, your router cannot work
again.
1. Make sure you have the latest firmware file in your computer. If not, try another way
to connect your computer to the Internet and download the latest firmware file from
www.tp-link.com.
2. Connect your computer to the router with an Ethernet cable.
3. Visit
192.168.0.1
and you will see the following upgrade page.
System Tools
>
Firmware
Hardware
Version.
section. Click
Upgrade.
Browse
to locate the downloaded new
Manage the Router
90
Advertisement
Table of Contents
