Troubleshooting milk froth preparation
EN
Aeroccino does not start.
Quality of milk froth not up to standard.
Red Button blinking.
Milk Overflows.
24
10119_UM_EXPERT&MILK_BREVILLE.indb 24
- Be sure to position the jug correctly on a clean base. Be sure to attach the whisk
to the jug correctly.
- Be sure to use whole or semi-skimmed milk at refrigerated temperature (about
4-6 °C). For a best result, the milk must be newly opened.
a) The appliance is too hot. Rinse it under cool water.
- Be sure to use the appropriate whisk.
- Check the corresponding indicator level.
- Be sure to use the appropriate whisk and the jug is clean.
- It is highly recommended to not use special enriched milks, powdered reconstituted
milks nor flavoured milks.
b) Whisk is missing.
c) Not enough milk. Fill milk frother up to one of the two "max" level.
19.08.16 12:38