Settings Mode: Emptying The System - Nespresso BREVILLE EXPERT&MILK Manual

Settings mode: Emptying the System

EN
Steam may come out of outlet.
The machine remains blocked for 10 minutes after emptying!
> 6 sec
18
10119_UM_EXPERT&MILK_BREVILLE.indb 18
❶
Remove the water tank. Place a container under the
coffee outlet. Remove, empty and place back the drip
tray.
❸
Enter settings mode:
- Press brewing button for 6 seconds - both dials will flash to confirm you are in settings mode.
- Select Espresso and press brewing button - Espresso icon flashes for confirmation.
- To exit this mode without doing a factory reset, push the brewing button. No / Exit: Yes / Confirm:
- To factory reset, turn temperature dial up to maximum position and press brewing button.
- The emptying process will begin.
- When the procedure is finished, clean the drip tray and the cup support.
- Machine turns to OFF mode automatically when empty.
before a period of non-use or for frost protection
❷
Ensure machine is OFF, and slider is closed.
19.08.16 12:38