Panasonic DMP-BD Series Service Manual page 23

2. Remove the Wire with Connector (A), (B).
3. Remove the Connector (C). (BD80 only)
4. Remove the 6 Screws (B) to remove Digital P.C.B..
5. Remove the 4 Screws (C) to remove BD Drive.
6. Put Digital P.C.B. on BD Drive and remove BDP/Digital
P.C.B. Module.
9.1.8. Power P.C.B.
1. Remove the Wire with Connector (A) and Wire with Con-
nector (B).
2. Remove the 4 screws (A) to remove Power P.C.B..
9.1.9. AV Out P.C.B. (BD80 only)
1. Remove the Connector (A).
2. Remove the 3 screws (A) to remove AV Out P.C.B..
23