Panasonic DMP-BD Series Service Manual page 10

6 Operating Instructions
6.1. Taking out the Disc from BD Drive Unit when the Disc cannot be ejected
by OPEN/CLOSE button
6.1.1. Forcible Disc Eject
6.1.1.1. When the power can be turned off.
1. Turn off the power and press [PAUSE] and [OPEN/CLOSE] keys on the front panel simultaneously for 5 seconds.
6.1.1.2. When the power can not be turned off.
1. Press [POWER] key on the front panel for over 10 seconds to turn off the power forcibly, and press [PAUSE] and [OPEN/
CLOSE] keys on the front panel simultaneously for 5 seconds.
6.1.2. When the Forcible Disc Eject can not be done.
1. Turn off the power and pull out AC cord.
2. Remove the Top Case.
3. Insert Eject Pin (JZS0484) into the hole on the bottom of BD Drive and slide the Eject Pin in the direction of the arrow to eject
tray slightly.
4. Put deck upward, and push out Tray by Eject Pin (JZS0484) or minus screw driver (small).
10