BenQ Home Entertainment Series User Manual page 35

• HDMI Range
Selects a suitable RGB color range to correct the color accuracy.
• CEC
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, turning on the HDMI CEC compatible device automatically turns on
the projector, while turning off the projector automatically turns off the HDMI CEC
HDMI
compatible device.
Settings
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device and
the projector.
Bidirectional
From Projector
From Device
Enables or disables the Quick Cooling function. Selecting On enables the function
Quick Cooling and projector cooling time will be shortened from a normal 90-second duration to
approximately 15 seconds.
Password See
With the control keys on the projector and remote control locked, you can prevent
your projector settings from being changed accidentally (by children, for example).
When the Key Lock is on, no control keys on the projector will operate except
To release panel key lock, press and hold
Key Lock
remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
You can turn off the LED warning lights. This is to avoid any light disturbance when
LED Indicator
viewing images in a dark room.
Returns all settings to the factory preset values.
Reset All
Settings
The following settings will still remain: Picture Mode, User Mode Management, Brightness,
Contrast, Color, Tint, Sharpness, Advanced, Projector Position, Sound, Source
Rename, and Password.
• Auto: Automatically selects a suitable color range for the incoming HDMI
signal.
• Full: Utilizes the Full range RGB 0-255.
• Limited: Utilizes the Limited range RGB 16-235.
Utilizing the password function on page 21.
POWER.
Turning on/off either the connected device or the
projector can turn on/off both.
When the projector is turned on/off, the connected
device will be activated/shut down, too.
When the connected device is turned on/off, the
projector will be activated/shut down, too.
(the right key) on the projector or
Menu operation 35