Correcting keystone
Keystoning refers to the situation where the projected image becomes a trapezoid due to angled
projection.
• To automatically correct this:
1. Press
/
on the projector or
2. After the Keystone correction page appears, press and hold the MODE key on the projector for
2 seconds to automatically correct the keystoning problem.
• To manually correct this:
1. Press
/
on the projector or
2. After the Keystone correction page appears, press
image. Press
/
/ /
/ /
to correct keystoning at the bottom of the image.
Press
/
.
on the remote control.
on the remote control.
/
to correct keystoning at the top of the
Press
/
.
Positioning your projector
15