Maintenance Schedule - Toro Groundsmaster 345 Operator's Manual

Minimum Recommended Maintenance Intervals
Maintenance Procedure
Check Battery Fluid Level
Check Battery Cable Connections
Lubricate All Grease Fittings
Lubricate Brake Cables
Check Cutting Unit Gear Box Oil Level
Clean Under Cutting Unit Belt Covers
Check Cutting Unit Drive Belt Adjustment
Check PTO Belt Tension
Inspect Air Filter, Dust Cup, and Baffle
Change Engine Oil and Filter
Check Fan and Alternator Belt Tension
Inspect Cooling System Hoses
Replace Transmission Oil Filter
Service Air Filter
Check Governor Oil Level
Decarbon Spark Arrestor Muffler
Check Rear Wheel Toe–In and Steering Linkage
Torque Wheel Lug Nuts
Replace Fuel Filter
Change Transmission Oil
Change Cutting Unit Gear Box Oil
Replace Spark Plugs
Pack Rear Wheel Bearings
Torque Head, Adjust Valves and Check Engine RPM
Initial break in at 10 hours
Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Coolant System – Flush/Replace Fluid
38

MAINTENANCE SCHEDULE

Maintenance Interval & Service
Every
Every
200hrs
100hrs
50hrs
Annual Recommendations:
Items listed are recommended every 1000
hours or 2 years, whichever occurs first.
Every
Every
400hrs