Table of Contents
Advertisement
1. Grab handles
2. Right side panel
3. Nose panel
4. Hydraulic fluid tank
Controls
Become familiar with all the controls (Figure 7) before you
start the engine and operate the machine.
Instrument Cluster
The warning and indicating lights (except the engine-intake
preheat light) come on when you turn the key switch to the
Run position before you start.
Warning Lights
The locations of these lights are shown in Figure 7.
Figure 6
Right side of machine
5. Steps
6. Hydraulic fluid sight gauge
7. Hydraulic-tank cap
1
2
3
4
1. Engine-intake preheat
light
2. Restricted
hydraulic-pressure filter
light
3. Restricted air-cleaner light
4. Restricted hydraulic-return
filter light
•
Restricted hydraulic-pressure filter light—This
light turns on when the engine is running and the
hydraulic-pressure filter is restricted. If the engine is
15
Figure 7
Instrument Cluster Lights
5. Parking-brake set light
6. Controls-in-neutral light
7. Low engine-oil pressure
light
8. Low hydraulic-pressure
light
5
6
7
8
G022146
Advertisement
Table of Contents
