1-1.
ASSEMBLY OF MECHANISM DECK
Note: Follow the assembly procedure in the numerical order given.
HOUSING
2 Install the hanger onto
4 Fit claw on B part.
3 Put the housing
under A part.
housing
A part
ARM (SUCTION)
projection
5 Fit projection on C part.
two claws of the housing.
C part
B part
7 Holder the hanger by bending the claw.
1 Install the catch to the hanger.
hanger
8 Hold the hanger by
– 2 –
6 Fit projection on D part.
bending the claw.
D part
2 Move the arm (suction) in the arrow
direction and fit on projection.
1 Fit the arm (suction) on the shaft.