Specifications; Attachments/Accessories - Toro 30447 Operator's Manual

Dome Light Switch
Press the switch to activate the dome light (Figure 6).
Wind Shield Latch
Lift up on latches to open the wind shield (Figure 7).
Press in on latch to lock wind shield in open position.
Pull out and down on latch to close and secure wind
shield.
1. Wind shield latch
Figure 7

Specifications

Note: Specifications and design are subject to change
without notice.
Width of cut
overall
front cutting unit
side cutting unit
front and one side cutting unit
Overall width
cutting units down
cutting units up (transports)
Overall length
Height
Height with ROPS
Height with cab
Ground clearance
Wheel tread (to center of tire)
front
rear
Wheel base
Weight (with cutting units)
(Weight with cab with cutting units)

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
18
124 inch (315 cm)
54 inch (137 cm)
37 inch (94 cm)
89 inch (226 cm)
127 inch (322 cm)
71 inch (180 cm)
144 inch (366 cm)
58 inch (147 cm)
81 inch (206 cm)
91 inch (231 cm)
6 inch (15 cm)
45 inch (114 cm)
47 inch (119 cm)
55-1/2 inch (141 cm)
4211 lb (1910 kg)
4715 lb (2139 kg)