D-Link DIR-320 Quick Installation Manual page 24

DIR-320
7. If your ISP uses MAC address binding, in the Ethernet section, in the
MAC field, enter the MAC address registered by your ISP upon
concluding the agreement. To set the MAC address of the network
interface card (of the computer that is being used to configure the router
at the moment) as the MAC address of the WAN interface, click the
Clone MAC address of your computer
address of a device connected to the router's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically). To set the router's MAC address as the MAC address of
the WAN interface, click the
icon (
8. If your ISP uses authorization via the 802.1x protocol, in the
Authorization via 802.1x protocol section, select the Authorization
in the ISP's network via 802.1x protocol checkbox. Fill in the fields
of the section in accordance with data provided by your ISP. The section
is not displayed for the connection of PPPoE, IPv6 PPPoE, PPPoE Dual
Stack, Static IPv6, and Dynamic IPv6 types.
).
Quick Installation Guide
icon (
Restore default MAC address
). To set the
24