Siemens SN Series Operating Instructions Manual page 39

Hide thumbs Also See for SN Series:
Table of Contents

Advertisement

Fault
Detergent residue in the
detergent dispenser or in
the tablet collecting tray.
Appliance stops in the
programme or programme
is interrupted.
Filling valves making
striking noises.
Knocking or rattling noise.
Unusual foam formation.
Cause
Spray arms blocked by utensils,
therefore detergent is not rinsed
out.
The detergent dispenser was
damp when filled.
Door not closed properly.
Do not place utensils or fragrance
dispenser in the tablet collecting
tray.
Top basket presses against the
door and prevents door from
being closed securely.
Power and/or water supply
interrupted.
Depends on domestic installation,
as appliance is not defective. No
effect on appliance function.
Spray arm strikes the utensils,
utensils not positioned correctly.
If there is a low load, the water
jets strike the washing tank
directly.
Light utensils move during the
wash cycle.
Handwash liquid in the rinse aid
dispenser.
Rinse aid spilled.
Fault, what to do?
Remedial action
Ensure that the spray arms can rotate freely.
Pour detergent into the dry detergent
dispenser only.
Close the door.
Check whether rear panel is being pressed
in, e.g. by socket or by hose holder which
has not been removed.
Restore power and/or water supply.
No remedial action possible.
Position utensils so that the spray arms do
not strike the utensils.
Load the appliance with more utensils or
distribute the utensils more evenly in the
dishwasher.
Arrange light utensils securely.
Immediately refill rinse aid dispenser with
rinse aid.
Remove rinse aid with a cloth.
en
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx series

Table of Contents