Shutting Down The Generator; Maintenance; Importance Of Maintenance - Duracell DG66M-R62 Owner's Manual

Shutting Down the Generator

1. Unplug any electrical device that's currently plugged into the AC
outlet before turning off your generator.
2. Run the generator at "no-load" for several minutes to stabilize the internal temperatures of the
engine and generator.
3. Turn the Engine Switch to the OFF position.
4. Turn Fuel Valve to OFF position.
In case of an emergency, turn the engine switch to the OFF position!
Note: Before transporting and storing your generator, first drain all fuel and turn the Engine
Switch to the OFF position.

Maintenance

Importance of maintenance

Proper maintenance is critical for smooth operation of your generator and safety.
Below are guidelines including a maintenance schedule and inspection procedures. There are additional
procedures that are more complicated or require special tools that are best performed by certified
technicians and qualified mechanics.
Improperly maintaining your generator or failing to correct a problem
before use can cause malfunction that could cause serious injury or
even death. Always follow the maintenance procedures and schedule.
The maintenance procedures and schedule apply to "normal" operating conditions. If your generator is
used more heavily or in extreme conditions (e.g. sustained high-load, high-temperature, dusty or wet
environments), consult your Service Dealer for recommendations that are applicable to your specific
needs and usage. Maintenance, replacement, and repair of your generator's emission control devices
DG66M-R62, -B62 & DG67M-R62, -B62
Electric Start Model
Recoil Start Model
31 | P a g e