Product Overview; Controls - Toro 74266CP Operator's Manual

Product Overview

Figure 3
1. Z Stand
©
2. Height-of-cut lever
3. Motion control lever
4. Seat belt
5. Roll bar

Controls

Become familiar with all the controls before you
start the engine and operate the machine (Figure 3
and Figure 4).
Figure 4
1. Hour meter
2. Ignition switch
3. Glow plug switch
4. Glow plug light
5. Engine Temperature light
6. Fuel cap (both sides)
7. Parking brake lever
8. Mower deck
9. Caster wheel
6. Throttle control
7. PTO Switch
8. Audible alarm
9. Fuel selector valve
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure 4).
Glow Plug Light
The glow plug indicator light turns on when the
glow plug button is engaged (Figure 4).
Glow Plug Switch
This switch activates the glow plugs and is
indicated by the glow plug light. Hold down the
glow plug switch for 10 seconds prior to starting.
Temperature Light
The temperature light comes on when the engine
is over heating (Figure 4).
Audible Alarm
This machine has an audible alarm that alerts the
user to turn off the engine or engine damage can
occur from over heating. Refer to Servicing the
Cooling System in Cooling System Maintenance,
page 45.
Fuel Selector Valve
The fuel selector valve is located behind the seat.
Close the fuel selector valve when transporting or
storing mower.
Move the selector valve to the lefthand (LH) or
righthand (RH) position for operation.
14