Connect The Cables - Axis Camera Station S1016 Mk II Installation Manual

AXIS Camera Station S10 Recorder Series
6
Do not use (Serial connector)
7
Line-out/speakers connector
8
PS/2 keyboard connector
9
USB 2.0 connectors (2)
10 Do not use (DisplayPort connectors (2))
11 USB 3.0 connectors (2)
12 Do not use (VGA connector)
13 Line-in/microphone connector

Connect the Cables

Important
Before you begin any of the procedures in this section, read the safety information that
shipped with your computer. For additional information, see www.axis.com
Note
Some devices may not be included if you did not order them.
1. Connect the monitors to the monitor connectors (for S1016 and S9002, use the
connectors located on the discrete graphic card. See page 10 and page 11 .)
2. Connect the USB keyboard and mouse.
12