Sources; Switch To A Device; Device Detection; One Touch Play - Philips 43PUS7150 User Manual

10

Sources

10.1

Switch to a device

From the list of Sources, you can switch to a
connected device and watch its programme.
To switch to a connected device...
1 - Press  SOURCES to open the Sources menu.
2 - Select one of the item in the source list. The TV
will show the programme or content of the device.
3 - Press  BACK, to watch TV.
To close the Sources menu without switching to a
device, press  SOURCES again.
10.2

Device Detection

When you connect a new device to the TV, the device
is detected and you can assign a device type as an
icon for the new device. If you connect a device with
HDMI CEC, the device gets its icon automatically.
If you want to change the icon assigned to a
connected device...
1 - Press  SOURCES to open the Sources menu.
2 - Select a connected device in the Sources menu,
then press  to select  .
3 - Press OK, then you can select a device type that
fits the connected device.
If the name does not fit the device or you want to
give the device a name of your own...
1 - Press  SOURCES to open the Sources menu.
2 - Select a connected device in the Sources menu,
then press  to select  .
3 - Press OK, then you can use the On-screen
Keyboard or the Remote Control Keyboard (if
available) to enter a new name.
4 - Press  to confirm.
If you want to restore the device icon to its original
name and type icon...
1 - Press  SOURCES to open the Sources menu.
2 - Select a connected device in the Sources menu,
then press  to select  .
3 - Press OK, then select Reset to restore.
If you want to rescan all TV connections and update
the Sources menu...
1 - Press  SOURCES to open the Sources menu.
2 - Press  to select  , then press OK.
10.3

One Touch Play

With the TV in Standby, you can switch on a disc
player with your TV remote control.
Play
To switch on both disc player and TV from Standby
and start playing the disc immediately,
press  (play) on the TV remote control.
The device must be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
38