Table of Contents
Advertisement
Pairing Again
You can pair another remote control with this TV.
The method to pair a remote control is different for a
remote control already paired with another TV
compared with a remote control that is not paired yet.
• The remote control is paired with another TV
To pair, hold the remote control close to the Philips
logo (about 10cm) and press the
and
Blue key at the same time. A message will
appear if pairing is successful.
• The remote control is not paired yet
To pair, hold the remote control close to the Philips
logo (about 10cm) and press OK. A message will
appear if pairing is successful.
Retail
To pair a new — not yet paired — TV with a remote
control which is already paired with another TV, hold
the remote control close to the Philips logo (about
10cm) and press the
same time.
A message will appear if pairing was successful.
6.4
IR Sensor
The remote control of the TV uses RF (radio
frequency) to send its commands to the TV. With RF,
you do not need to point the remote control at the
TV.
However, the TV can also receive commands from a
remote control that uses IR (infrared) to send
commands. If you use such a remote control, always
make sure you point the remote control at the
infrared sensor on the front of the TV.
Red
Red and
Blue key at the
6.5
Batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the keyboard side of the remote
control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
For more information, press
up End of use.
6.6
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
26
Keywords and look
Advertisement
Table of Contents
