Philips 43PUS7150 User Manual page 54

Lounge Light+hue
If you installed Ambilight+hue, you can let the hue
bulbs follow Lounge Light from Ambilight. The Philips
hue lamps will expand the Lounge Light effect across
the room. The hue bulbs are switched on and
automatically set to follow Lounge Light when you
configure Ambilight+hue. If you do not want the hue
bulbs to follow Lounge Light, you can switch the
bulbs off.
To switch the hue bulbs off...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Advanced > Lounge Light+hue and
press OK.
4 - Select Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
ISF Tuning
When an ISF expert calibrates the TV, a static
Ambilight colour can be calibrated. You can select
any colour you want to calibrate. With the ISF
Calibration done, you can select the static ISF colour.
To select the ISF static colour...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Advanced > ISF Tuning and press OK.
4 - Press the arrows  (up) or  (down) to adjust
the value.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Ambilight + Hue
Configure
With Configure, you can setup your Philips Hue bulbs
to follow the colours of Ambilight.
To setup your Philips Hue bulbs...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Configure, and
press OK.
4 - Select Start.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Switch Off
To switch off Ambilight+hue...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Switch Off, and
press OK.
4 - Select Off, then press OK.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Immersion
With Immersion, you can adjust how accurate the
Hue bulbs follow the Ambilight.
To adjust Ambilight+hue immersion...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Immersion, and
press OK.
4 - Press the arrows  (up) or  (down) to adjust
the value.
5 - Press  (left) repeatedly if necessary, to close
the menu.
View Configuration
With View Configuration, you can view current setup
of the Ambilight+hue, network, the Bridge and bulbs.
To view Ambilight+hue configuration...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > View Configuration,
and press OK.
4 - Select Off, then press OK.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Reset Configuration
To reset Ambilight+hue...
1 - Press  , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Reset Configuration,
and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
54