Before Installing The G8264; Recording Important Product Information - Lenovo RackSwitch G8264 Installation Manual

Hide thumbs Also See for RackSwitch G8264:
Table of Contents

Advertisement

Before Installing the G8264

Recording Important Product Information

30
RackSwitch G8264 Installation Guide
Attention: Product information is required in order to register your G8264, update
its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the G8264 is
installed. To prevent the need to remove the switch in order to read required product
information, locate and record the information shown on
An example of the product information labels is shown as follows:
Figure 7. Sample product labels from bottom, top, and rear of the switch
Machine Type-Model 1611-16E
S/N 1000001
(1S) Lenovo MT-Model, S/N 161116E 1000001
16116e100001
P/N: 00E6965
*00E6965*
S/N Y010CM1AG001
*Y010CM1aG01*
FRU P/N: 00D6002
Made in Malaysia
Date: 12-07-17
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the front, rear, and/or bottom of the G8264 contain the
Machine Type-Model (MTM) number, serial number, part number of the switch.
These labels also include the Media Access Control (MAC) address (on the rear
panel of unit) of the switch. Though helpful, the MAC address is not required for
opening a service call.
Print this page and record product information below. Keep the information in a safe
place for future reference. You will need this information when you register the
switch or open a service call with Lenovo.
Table 9. Important product information
Product Name
Machine-Type Model
Serial Number
Part Number
Media Access Control (MAC)
address for switch
MAC addresses for other
components
For convenience, once the G8264 is installed and initialized, you can use the
show sys-info command in the switch firmware interface to display the product
serial number and other required information. For more information, see
"Configuring Vital Product Data" on page
MT: 7844-590 PID: 7844AGV
EC L37940
RackSwitch G8264
67.
Table 9
prior to installation.
MT: 7844 590
SN: 06AA123
EID:000435
SN: 06AA123

Advertisement

Table of Contents
loading

Table of Contents