Sony HT-XT3 Operating Instructions Manual page 36

Notes on the glass
 Do not set something hot on the top
such as a heated pan or pot. The glass
top may be broken, cause injury, or be
a cause of damage to this system.

Do not impart a strong impact to the
glass top. The glass top of this system
is made of hardened glass; however,
there is no guarantee it cannot be
shattered. Heed the following so as
not to break the glass:
 Do not impart a strong impact to the
glass top by hitting it or by dropping
something pointed.
 Do not scratch the glass with
something pointed or poke it.
 Do not hit the side of the glass when
installing in a storage rack.

If the glass is broken, do not touch it
with bare hands. It may cause cuts.

Do not place anything on this system
that weighs over 50 kg (110 lb 4 oz).
Such an item can damage the glass
top or this system.

A tempered glass is stouter than
ordinary glass but will shatter if
broken.
 A tempered glass can shatter
spontaneously in extremely rare
instances.
The glass used in this system has been
carefully selected: however, there is
no guarantee it cannot be shattered.

Be careful to keep the system level,
when installing or moving it.
Tilting it may result in damaging the
system, or injury due to falling of the
glass top.
On operation
Before connecting other devices, be
sure to turn off and unplug the system.
On adjusting volume
Do not turn up the volume while
listening to a section with very low level
inputs or no audio signals. If you do, the
speakers may be damaged when a peak
level section is suddenly played.
36
US
On cleaning
Clean the cabinet, panel, and controls
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine.
On replacement of parts
In the events that this system is
repaired, repaired parts may be retained
for reuse or recycling purposes.
IMPORTANT NOTICE
Caution: This system is capable of
holding a still video image or
on-screen display image on your TV
screen indefinitely. If you leave the
still video image or on-screen display
image displayed on your TV for an
extended period of time, you risk
permanent damage to your TV
screen. Plasma display panel
televisions and projection televisions
are susceptible to this.
Notes on updating
This system allows you to update the
software automatically when connected
to the Internet via a wired or wireless
network.
You can add new features and use the
system with more convenience and
safety by updating the system.
If you do not want to update
automatically, you can disable the
function by using SongPal installed on
your smartphone or tablet. However,
the system may update the software
automatically for reasons such as
safety, even if this function is disabled.
You can also update the software using
the settings menu when this function is
disabled. See "Using the Setup Display"
(page 22) for details.
You may not use the system while the
software is being updated.