Sony RCD-W50C Service Manual page 50

RCD-W50C
4-7. NG Message List
Message
Tray OPEN NG!
Tray Close NG!
SLEDIN NG!
SLEDOUT NG!
RIDR NG!
SNread (1) NG!
SNread (2) NG!
SNread (3) NG!
FBIASADJ NG!
FEOSADJ NG!
FESAMPADJ NG!
RFACCHK NG!
RPINWADJ1 NG!
RPINWADJ2 NG!
SERVOSET NG!
TSa NG!
PLAYSW NG!
STOP NG!
AMS NG!
ATIPPLAY NG!
END TNO get NG!
LEADOUT info.get NG!
Invalid EndTrackNo./LeadoutTime !
Use the Blank disc
DIR unlock!
RWP NG!
RWWP NG!
REC NG!
50
The tray has not opened within the specified time.
The tray has not closed within the specified time.
The sled has not moved toward inner circumference within the specified time.
The sled has not moved toward outer circumference within the specified time.
The RID information could not be read out within the specified time.
The SN (1) information could not be read out within the specified time.
The SN (2) information could not be read out within the specified time.
The SN (3) information could not be read out within the specified time.
The Focus Bias Adjustment has not completed within the specified time.
The FE Offset Adjustment has not completed within the specified time.
The FE Amplitude Adjustment has not completed within the specified time.
The RFAC amplitude is abnormal or the adjustment has not completed within the specified time.
The Read Power (during Write1) Adjustment has not completed within the specified time.
The Read Power (during Write2) Adjustment has not completed within the specified time.
The Servo Setting has not completed within the specified time.
The ATIME Search has not completed within the specified time.
The Play operation has not started within the specified time.
The Stop operation has not completed within the specified time.
The AMS operation has not completed within the specified time.
The ATIP Play operation has not started within the specified time.
The record-end track information could not be obtained within the specified time.
The record-end time information could not be obtained within the specified time.
The illegal record-end track and its time information were obtained.
The disc exceeding the allowable limit is used.
The equipment could not be synchronized with the signal connected to DIN2.
The CD-R Write Power setting has not completed within the specified time.
The CD-RW Write Power setting has not completed within the specified time.
The record operation could not be started within the specified time.
Cause