RCD-W50C
4-3. CD-RW Playback Adjustment
Press "Open".
2) Place the test CD TCD-W091W on the tray as prompted by
the display and press "OK". (Fig. 4-27)
3) Press the "RESET" button (SW101) of the jig as prompted by the display.
4) As prompted by the message shown in Fig. 4-29, check that
the waveform as shown in Fig. 4-28 appears on an oscilloscope.
4 Fig. 4-28
5) As prompted by the message shown in Fig. 4-31, check that
the waveform as shown in Fig. 4-30 appears on an oscilloscope.
RF signal waveform
6) As prompted by the message shown in Fig. 4-33, check that
the waveform as shown in Fig. 4-32 appears on an oscilloscope.
RF signal waveform
4 Fig. 4-32
44
TIME/DIV : 500ns
VOLT/DIV : suitable value
TIME/DIV : 500ns
4 Fig. 4-29
4 Fig. 4-31