Table of Contents
Advertisement
Deep-frying function
This function is used for frying on the two side hotplates on the
right-hand side, regulating the temperature of the pan.
Deep-frying features
The hotplate only heats when necessary. This way energy is
saved. The oil and fat do not overheat.
Notes
Never leave oil or fat cooking unattended.
■
Place the pan at the centre of the hotplate. Ensure that the
■
base of the pan is the right diameter.
Do not cover the pan with a lid. Doing so will cause the
■
automatic regulation not to function. A protective screen may
be used without affecting the automatic regulation
Only use oil which is suitable for frying. If using butter,
■
margarine, olive oil or pork lard, select the min temperature
setting.
Temperature settings
Power level
Temperature
high
max
medium-high
med
medium-low
low
low
min
How to program
Check the suitable temperature setting in the table. Place the
pan on the hotplate.
The hob must be switched on.
Select the hotplate and press the
1.
lights up on the hotplate display.
The possible temperature settings are displayed on the
programming zone.
Suitable for
e.g., potato pancakes, sautéed potatoes, and rare beefsteak.
e.g., thin fried foods like frozen pies, escalopes, ragu, vegetables
e.g. thick fried food such as hamburgers and sausages, fish.
e.g. omelettes, using butter, olive oil or margarine
~
symbol. The
'
indicator
Pans to use with the frying function
There are pans suited to this function which may be purchased
later as optional accessories, in specialised stores, or through
our Technical Assistance Service. Always indicate the related
reference code.
HZ390210 small pan (15 cm in diameter).
■
HZ390220 medium pan (19 cm)
■
HZ390230 large pan (21 cm)
■
The pans are non-stick. Food may also be fried in a small
amount of oil.
Notes
The frying function has been especially adjusted for these
■
types of pans.
With other types of pans, the temperature may be set above
■
or below the level selected.Firstly try with the lowest
temperature setting, changing it as necessary. The pans may
overheat.
Within the next 10 seconds, select the desired temperature
2.
setting in the programming zone.
The frying function will have been activated. The temperature
indicator
stays switched on until the frying temperature is
p
reached. A signal then sounds and the temperature symbol
turns off.
Note: To display the temperature indicators
temperature setting, the hotplate must be selected.
After reaching the temperature setting, add oil to the pan and
3.
then the ingredients.
Turn the food over to avoid burning.
Turning off the deep-frying function
Set to 0 in the programming panel.
and
p
9
Advertisement
Table of Contents
