Childproof Lock; Activating And Deactivating The Childproof Lock; Powerboost Function; Restrictions When Using - Siemens EH...MN SERIES Instruction Manual

Hide thumbs Also See for EH...MN SERIES:
Table of Contents

Advertisement

Adding more cookware
Press the
symbol. The new pan will be detected and the
þ
previously selected power level will be maintained.
Note: If the pan on the hotplate that is switched on is moved or
removed, the hob will perform an automatic search and the
previously selected power level will be maintained.

Childproof lock

The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
seconds. The
symbol lights up for 10 seconds. The range
@
is locked.
To deactivate: press and hold the
4 seconds. The lock is now deactivated.

Powerboost function

The Powerboost function can be used to heat large amounts of
water more quickly than the power level

Restrictions when using

This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the
and
symbols will flash on the display of the
Š
selected hotplate; then the power level
without the function being activated.
Note: The greatest amount of power supplied in the flexible
zone is obtained by placing a pan in the centre of the zone, as
indicated in the Flexible zone chapter.
12
symbol for approx. 4
#
#
symbol for approx.
Š
.
is automatically set
Š
To deactivate
Set it to
in the programming zone.
Return to using as two hotplates
Select one of the hotplates in the flexible zone.
Note: When a hob is switched off and later switched on again,
the flexible zone will again be used as two hotplates.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.

To activate

Select the power level
Š
1.
Press the programming panel located above the
2.
The function has been activated.

To turn off

Press the programming panel located above the
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
.
@›
@›
symbol.
symbol.

Advertisement

Table of Contents
loading

Table of Contents