Advanced New Message Alerting Features - Panasonic KX-TGF380 Operating Instructions Manual

Operating the answering system
MMENUN a MbN: "Answering device" a
MSELECTN
Key Operation
MDN or MCN Adjust the receiver/speaker volume
(during playback)
1 or MFN Repeat message (during
playback)
2 or MEN Skip message (during playback)
3 Enter the "Settings" menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
MPAUSEN
Pause message
9 or Stop recording
MSTOPN Stop playback
0 Turn answering system off
*3 Erase currently playing message
*4
*5 Erase all messages
*6 Reset to a pre-recorded greeting
message
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: "Erase" a MSELECTN
a MbN: "Yes" a MSELECTN
Calling back (Caller ID subscribers only)
n Using a landline:
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
n Using a cellular line:
1
Press MPAUSEN during playback.
2
MbN: "Call back (Cell)" a MSELECTN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 19).
For assistance, please visit http://shop.panasonic.com/support
TGF380_TG590SK(en-en)_0907_ver201.pdf 59
*1
*2
Answering System for Landline
3
MbN: Select the desired cellular phone. a
MSELECTN
Editing the number before calling back
n Using a landline:
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 50).
4
M N
n Using a cellular line:
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 50).
4
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 19).
5
MbN: Select the desired cellular phone. a
MSELECTN
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MSELECTN a MOFFN
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to inform
you of a new message arrival when new
messages are recorded. The base unit beeps 2
times every minute until you listen to the
messages, if the "Base unit beep" setting is
turned on. The default setting is "Off".
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1
MMENUN#339
2
MbN: Select the desired setting. a MSAVEN
59
2016/09/07 12:38:13