Language Settings - Panasonic KX-TGF380 Operating Instructions Manual

Getting Started
Base unit display items
Item Meaning
The landline is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
A cellular line is in use.
R When flashing:
The cellular call is put on hold.
R When flashing rapidly:
A cellular call is being received.
Ringer volume is off.
41)
Silent mode is on. (page 45)
Call sharing mode is off.
(page 43)
"Greeting only" is selected.
Caller messages are not recorded.
(page 63)
– A cellular call is in progress on
that line.
– The cellular line is selected for
the setting.
Power backup mode is on.
(page 10)
Blocked call (page 28)
A Bluetooth headset is connected
to the base unit. It is ready for use.
A Bluetooth headset is in use.
In use Answering system is being used by
the handset.
Cell1 in
Someone is using the
use
corresponding line.
Cell2 in
use
Cell1
&Cell2
in use
Line in
use
*1 Corresponding lines (C1, C2: cellular line) are
indicated next to the item.
14 For assistance, please visit http://shop.panasonic.com/support
TGF380_TG590SK(en-en)_0907_ver201.pdf 14
*2 Corresponding lines (C1, C2: cellular line, L:
landline) are indicated next to the item. If all
lines are turned off, no line is indicated.
CELL indicators on the base unit
The CELL indicators show each cellular line status.
Status
On
*1
Flashing
*2 (page 39,
Flashing
rapidly
Light off

Language settings

Display language
You can select either "English" or "Español"
as the display language. The default setting is
"English".
Handset / Base unit
1
MMENUN#110
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Voice guidance language
You can select either "English" or "Español"
as the voice guidance language of the answering
system. The default setting is "English".
You can configure this setting using either the
base unit or one of the handsets.
Meaning
A cellular phone is connected.
Ready to make/receive cellular calls.
– The cellular line is in use.
– Phonebook entries are being
copied from a cellular phone.
(page 52)
– The base unit is searching for the
paired cellular phone.
– The base unit is pairing a cellular
phone.
– A cellular call is put on hold.
A cellular call is being received.
– A cellular phone is not paired to
the base unit.
– A cellular phone is not connected
to the base unit. (page 18)
2016/09/07 12:38:11