Operation Without The Remote Control Unit; Care And Cleaning - Sanyo SAP-K181A Technical & Service Manual

INDOOR UNIT
ON
Operation
OFF
TEST
selector
Casing and Grille
(Indoor Unit)
CAUTION
20
Operation without the Remote
Control Unit
If you have lost the remote control unit or it has trouble, follow the
steps below.
1. When the air conditioner is not running
If you want to turn on the air conditioner, switch the operation selector
to the OFF position, and then to the ON position.
The set temperature and fan speed are automatically set at
NOTE
the last selection before stopping.
2. When the air conditioner is running
If you want to turn off the air conditioner, switch the operation selector
to the OFF position.

Care and Cleaning

1. For safety, be sure to turn the air conditioner off and also to
disconnect the power before cleaning.
2. Do not pour water on the indoor unit to clean it. This will damage
the internal components and cause an electric shock hazard.
Clean the casing and grille of the indoor unit with a vacuum cleaner
brush, or wipe them with a clean, soft cloth.
If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the grille, be careful not to force the vanes out
of place.
1. Never use solvents, or harsh chemicals when cleaning the indoor
unit. Do not wipe the plastic casing using very hot water.
2. Some metal edges and the fins are sharp and may cause injury if
handled improperly; be especially careful when you clean these
parts.
3. The internal coil and other components of the outdoor unit must
be cleaned every year. Consult your dealer or service center.
OI-229-20EG