Special Remarks - Sanyo SAP-K181A Technical & Service Manual

''DRY'' ( ) Operation
How it works?
Power failure
during operation
Clicking Sound
Clicking sound is
heard from the air
conditioner
Remote Control Unit
OI-226-15EG

Special Remarks

Once the room temperature reaches the level that was set, the unit
•
repeats the cycle of turning on and off automatically.
During DRY operation, the fan speed is automatically set to LOW or
•
VERY LOW; the fan speed then switches back and forth between
LOW (for 20 seconds) and VERY LOW (for 10 seconds).
''DRY'' operation is not possible if the indoor temperature is 15 °C or
•
less.
In the event of power failure, the unit will stop. When the power is
•
resumed, the unit will restart automatically after three minutes.
In cooling operation, any plastic parts may expand or shrink due to a
•
sudden temperature change. In this event, a clicking sound may
occur. This is normal, and the sound will soon disappear.
The remote control unit sends the setting condition to the air
•
conditioner regularly at three minute intervals.
15